Sewage systems use gravity to move solids and liquids up and down the sewage line. However, in some situations, you may not be able to put a plumbing device uphill from a sewage system. In such cases, a sewage pump becomes indispensable to move effluents from one location to another.
Most sewage pumps are submersible pumps located at the bottom of a receptacle or basin, such as a septic tank. The pump intake is located as close to the floor of the septic tank as possible. These pumps are designed to move wastewater from low-level areas to a sewer main. It pumps out waste materials, including water, solids, and sludge, to keep homes clean and odor-free.
How do sewage pumps work?
Showers and toilets in homes create wastewater which gets flushed down into a sewage pit. The sewage float switch gets triggered when the water level goes high. The switch turns on the motor-powered sewage pump, which then sucks out the wastewater and pushes it up through the pipes for discharge into the main sewer lines. The sewer lines go into a central water filter cartridge treatment facility where the wastewater is treated.
Residential sewage pumps are capable of handling solids up to 2 inches in diameter. However, commercial sewage pumps may be able to handle even larger items.
If you are looking for sewage pumps, Goulds and Myers offer some of the best pumps in the market.
Goulds sewage pumps
Goulds Water Technology is a brand of Xylem Inc. providing pumps for residential, commercial, and agricultural applications and Goulds Pumps remains a part of ITT Corporation providing pump products for the industrial market. Goulds Pumps is one of the oldest and largest pump manufacturers in the world, going back to 1848. It is also perhaps the most widely-recognized and respected brand serving numerous industries, such as mining, oil and gas, chemical, power generation, pulp and paper, and more.
PumpProducts is a stocking Goulds pumps and parts distributor. Here are some of the models you can choose from:
Goulds GSD0511M
The Goulds GSD0511M is a submersible sewage pump made of durable cast iron with premium features and long-lasting performance. It is a great choice for residential sewage systems as well as heavy-duty sump, water transfer, and dewatering applications. It is a 115v, single-phase pump, which also comes with a cast iron vortex impeller for better performance. If you have any kind of inquiries relating to where and ways to utilize RO housing; https://www.fcc.gov,, RO housing you could call us at the site. The Goulds GSD0511M comes with a corrosion-resistant stainless steel motor shaft and hardware, giving it an extremely long service life.
Goulds GSD0511M, GSD Series, Submersible Sewage Pump
Goulds PS51M
The Goulds PS51M is great for residential sewage systems, water transfer, or heavy-duty sump applications. It can handle sewage containing solids up to 2 inches in diameter. It has a cast iron body, corrosion-resistant construction, and thermoplastic impeller and cover. The pump also has built-in thermal overload protection, stainless steel fasteners, and a permanently lubricated motor for long service life.
Myers Sewage Pumps
Myers is a very well-known brand in the pump industry, and its legacy goes back more than 150 years. Founded by brothers Francis and Philip Myers of Ohio, who initially built farm equipment before moving on to pumps. From modest beginnings, the brand grew and evolved over time to become one of the most renowned names in the pump industry.
PumpProducts is a stocking Myers pumps and parts distributor. Here are some of the models you can choose from:
Myers MWS550110M
The Myers MWS550110M is a submersible sewage pump with a cast iron volute case and motor housing. The vortex impeller is made out of reinforced Noryl, and the inserts are brass-threaded. It comes with a built-in thermal overload with automatic reset, stainless steel hardware, and a heavy-duty lift-out ring. The mechanical seal and bearing are permanently lubricated to ensure long service life.
Myers MWS550110M, MWS5 Series, Sewage Pump
The Myers MWS550110M can be used for sewage, effluent, wastewater removal, dump drainage, water transfer, dewatering, and flood control.
Myers CMV5M-11
If you are looking for an economic sewage pump, consider buying the Myers CMV5M-11. Its features include a combination of thermoplastic and cast iron construction, reverse osmosis membrane making it extremely corrosion-resistant. It can easily handle solids up to 2 inches in diameter through its recessed vortex impeller. It also comes with an oil-filled motor for continuous bearing lubrication and maximum heat dissipation. You can use this pump for sewage, effluent, and high-capacity sump drainage.
PumpProducts
PumpProducts is one of the leading suppliers of pumps and parts in the US. If you are looking for the right sewage pump, our engineers are there to help you. Call our toll-free number 1-800-429-0800 to find the best pump for your needs.